ROAD BLOCKERS

HRR-HS-CT (ELECTROMECHANICAL OPERATED) GENERAL INFORMATION

Optima HRR-HS-CT electro-mechanical road blockers are designed especially for entrance points which have a threat of vehicle attack or for the ones that have high-security requirements. If there is a threat of vehicle attack in addition to the control of vehicle access in high-security applications, road blockers are the unique solution and the most secure systems. Even though the attack is from high tonnage vehicles with high speeds, it is not possible for the vehicle to keep on moving because of the damage given to front, wheels and the bottom of the vehicle. Drive unit is electro-mechanical, but in case of power failure, road blocker can be lowered or lifted manually with the help of a UPS. It enables 6 half cycle raise/lower an emergency raise function. Typical raise/lower time is 5-6 seconds. With the help of Optima PLC (programmable logic control), raise/lower function can be achieved by every kind of card readers, biometric readers like fingerprint or hand shape, radio control, on/off key switch, etc. Besides, safety accessories like inductive loop detectors, flashing lights or red/green traffic lights can be integrated into the system very easily. Also these road blockers have PAS68:2010 V/7500(N3)/80/90:0.0/6.15 Crash Tested Certificate. This means that M50‐P1 “zero penetration” according to American Standard.

STANDARD FEATURES IN HRR-HS-CT (ELECTROMECHANICAL OPERATED) SERIES

Test parameters PAS68: V/7500[N3]/80/90:0.0/6.15
Equivalent to K12, M50, ASTM F2656, IWA14-1
Height when raised 1100 mm
Environmental durability Red oxide painted, finishing with painted yellow & red stripes (‘STOP’ warning in the front)
Axle load 22 tons
Structure Heavy duty
Top plate Plain, painted to yellow with black stripes
Type of steel S235/RAEX250-Quality 37 minimum
Red/green LED traffic light Available, 200mm diameter, steel post 2 mt height and electrostatic ally powder coated
Hinges Heavy duty hardened and or stainless steel AISI 303 Quality for hydraulic cylinder connections and moving part of the blocker
Bearing Bronze
Power 380 V, 3 Phase, 50-60 Hz
Raise lower time 5-6 seconds
Desktop keyboard Raise, lower, emergency stop, key operated, ‘keyboard in use’ light indicator
Extra I/O at the PLC Enough I/O’s to connect any card reader, extra override keyboard etc. later on
Proximity switch Available to sense the position of the blocker
Loop detector This detector is used for safety
Power back-up system options UPS
Cabinet IP 65 with dust filter
Times of Use 720 full cycle/a day, heavy duty
Environmental conditions -20/+65°C, 95% humidity


Scroll to Top